Safety Operating Procedures and Operation of the Ironing Machine

　　Safety Operating Procedures and Operation of the Ironing Machine

　　Share the safety operating procedures and functioning of the ironing machine.

　　General Operating Procedures for the Machine

　　1. First, turn on the steam power switch and check whether there is any water leakage at the air inlet or gate valve.

　　2. Turn on the steam iron's drain pipe for 5 to 10 seconds, moving it up and down, until no water droplets appear in the steam—this indicates it’s ready.

　　3. If the air intake is too small, the cotton pad needs to be replaced; otherwise, it will affect the ironing performance.

　　4. During operation, if you notice a ruptured air hose or the iron leaking steam, seeping water, or if screws become loose, immediately report it to the police for repair by the equipment maintenance technician.

　　5. During use, if the ironing board makes unusual noises or emits a strange odor, immediately unplug it and contact a technician for repair.

　　6. During operation, barefoot or using cardboard boxes or cotton pads for actual handling is not permitted.

　　7. Always perform a rigorous inspection before operation—only proceed if all steps are functioning properly.

　　8. When taking a short break for workplace exercises or temporarily stepping away from your post due to work requirements, first place the iron against the right-hand wall and then unplug it from the power source.

　　9. Without ironing, turn off the two small air valves on your personal ironing station.

　　10. Ensure daily cleaning and maintenance of the ironing board. When extending or retracting the ironing surface, follow the established process standards carefully to maintain a neat and uniform appearance.

　　11. To ensure that apparel products are not contaminated by environmental pollution, strictly adhere to the "Three Nos and One Avoidance" guidelines: no splashes, no shine, no napping marks, and avoid scorching or burning.

　　12. Strictly follow the requirements to regularly maintain the system, ensuring that equipment is kept clean and well-maintained. If any mechanical issues arise, promptly contact the equipment maintenance team—never attempt to disassemble or reassemble the equipment on your own.

　　13. Conduct a comprehensive safety check of the ironing tables used each week.

　　14. Training will be provided for beginners in ironing, and only those who pass the training will be allowed to start working.

　　What should I do if the iron no longer heats up?

　　1. Typically, the issue is a burnt-out electrothermal material. Try replacing it with a steam heating element. Also, don’t forget to first check whether any electrode connections in the power circuit have come loose.

　　2. First, check whether there’s an issue with the household power outlet or power supply. If not, we recommend contacting the device’s after-sales service for a replacement. In this case, it seems the electric heater inside the server has malfunctioned—these types of small appliances typically come with a one-year warranty.

　　How to repair a leak in the gas-fired steam boiler of a pressing machine

　　It could be the heating plate, or the gate valve connector that’s broken and can be replaced. However, if the boiler drum itself has developed a hole, then it’s no longer worth repairing—because even if you weld it up here, it’ll just leak again over there, proving that the entire drum is already corroded beyond repair.

Alright, if anyone needs a steaming machine, don’t forget to reach out to our company.